A380 Blade Off Test

They normally have high-speed cameras running; that short video is a mish-mash of super-slow-mo and regular speed footage. There are much longer versions on YT, e.g. this one [0] which covers it in more detail (watch the people in the room jump when it blows - despite being a fair distance away). [0] ▶ this video

> A failure in these blades would be catastrophic, resulting in the destruction of the engine, likely followed by the plane itself. Aaaaand the author just lost any credibility with me whatsoever. This is someone who knows big words, maybe did some research and ChatGPTing, and doesn't actually know shit about aircraft or their engines. On passenger aircraft because passengers sit directly inline with the path a blade with insane levels of kinetic energy will probably go, the nacelle is designed to contain it. The engine must be able to contain a "blade off" event where a blade snaps during full rated thrust. Two videos: ▶ this video link The aircraft will not be "destroyed." The blade could fail during takeoff climb and the plane would still be able to climb because all twin engine passenger jet aircraft must be able to conduct all phases of flight on one engine. SWA 1380 had a passenger fatality not because of the blade hitting them, but because part of the cowling disintegrated, broke the window, and she was partially sucked out of the aircraft, which killed her. If she'd been wearing her seatbelt, she would likely be alive today. As would several other passengers who, over the years, have been killed by debris breaking the window and them being sucked out. The blade itself did not leave the engine. link That article lists a number of incidents, in roughly half of which the blade was contained. All the flights made it back to an airport...

fan blade failures are expected. Engines are designed to contain failed blades. There is a huge test that is done whereby a blade is "failed" at full throttle. Engine dies but damage is to be contained. ▶ this video (A380 "blade off" test, rare footage of giant engine failing)

the engines are designed to contain a fan blade[1], not a turbine disk [2]. Fan blade is a thin piece of light alloy where turbine disk is solid piece of steel. [1] ▶ this video [2] link